Tel: +86-574-88959933
Fax: +86-574-88959932
Contact person: Ms. Betty Kang
Mobile phone: 86-18757419558
E-mail: info@microshafts.com
   
betty@microshafts.com
   zhaoxuaxles@gmail.com
Motor Shaft,Axle Shaft,Steel Shaft Manufacturers -> News -> How to fix axle shaft in a correct way?

How to fix axle shaft in a correct way?

  Axle shaft installation of the good or bad, will affect the accuracy of the bearing life and performance. , The installation of the bearing, in accordance with the operating standards includes the following items, including the bearing installation.

  Axle shaft bearings shall be installed according to the bearing structure, size and bearing components with the nature, the pressure should be added to a tight fit to the ferrule end surface, may not pass the pressure of the rolling element bearing installation generally use the following method:

  axle shaft inner ring and shaft to make a tight fit to the outer ring and the bearing hole is loose with the available presses will be bearing the first pressure mounted on the shaft, then the axis together with the bearing with load bearing hole.

  And press-fit the bearing inner ring end face of the pad assembly sleeve of a soft metal material (copper or mild steel), the assembly casing diameter should be slightly larger than the journal diameter, outside diameter slightly smaller than the bearing inner ring ribs, to avoid pressure in the cage.
 

Steel shaft,axle shaft and motor shaft which are producted by the professional manufacturer and exporter Fenghua Zhaoxu Micro Shaft Co., Ltd. are sold at home and overseas.
Home | About us | Device | Products | New Products | Application | Customer Care | Network | Contact us | Sitemap