Tel: +86-574-88959933
Fax: +86-574-88959932
Contact person: Ms. Betty Kang
Mobile phone: 86-18757419558
E-mail: info@microshafts.com
   
betty@microshafts.com
   zhaoxuaxles@gmail.com
Motor Shaft,Axle Shaft,Steel Shaft Manufacturers -> News -> How to dismantle the precision shaft in scientific method?

How to dismantle the precision shaft in scientific method?

  Precision shaft removal and installation should be the same carefully. Careful not to damage the bearings and the parts, especially the interference fit bearing removal, the operation difficult.

  Therefore, prior to consideration at the design stage to facilitate the dismantling, demolition tools required design is also very important. The demolition is in accordance with the drawings of demolition methods, in order to investigate the bearing with the conditions to obtain the demolition operation foolproof.

  Removal of the outer ring outer ring interference fit demolition in advance in case the outer circumference of the extrusion screw set with several screws, hand tighten the screws evenly, while demolition. These usually cover screw hole blanking plugs, tapered roller bearings, etc. separable bearings, set in the shell stand shoulder several incisions, the use of pads, with the press demolition, or gently tap the demolition.
 

Steel shaft,axle shaft and motor shaft which are producted by the professional manufacturer and exporter Fenghua Zhaoxu Micro Shaft Co., Ltd. are sold at home and overseas.
Home | About us | Device | Products | New Products | Application | Customer Care | Network | Contact us | Sitemap