Tel: +86-574-88959933
Fax: +86-574-88959932
Contact person: Ms. Betty Kang
Mobile phone: 86-18757419558
E-mail: info@microshafts.com
   
betty@microshafts.com
   zhaoxuaxles@gmail.com
Motor Shaft,Axle Shaft,Steel Shaft Manufacturers -> News -> What is the repair method of rotor shaft?

What is the repair method of rotor shaft?

  When the screw to reach the end of the bolt torque 10 ~ 20N • m, such as the gasket can not spare, indicating the length of the bearing pads to the right side of the mouth out, indicating the bearing length is too long, Zen should be no sudden end of file positioning low; tighten to specified torque value without a gasket on the spare, indicating the bearing is too short, should be re-matching.

  The new release rotor shaft housing bearing, require bearing housing bore radius of curvature greater than the radius of curvature, when the bearing seat hole mounted, by means of bearings and bearing its own stretch the hole tightly, in order to facilitate heat.
 

Steel shaft,axle shaft and motor shaft which are producted by the professional manufacturer and exporter Fenghua Zhaoxu Micro Shaft Co., Ltd. are sold at home and overseas.
Home | About us | Device | Products | New Products | Application | Customer Care | Network | Contact us | Sitemap