Tel: +86-574-88959933
Fax: +86-574-88959932
Contact person: Ms. Betty Kang
Mobile phone: 86-18757419558
Motor Shaft,Axle Shaft,Steel Shaft Manufacturers -> News -> How to properly care for motor shaft

How to properly care for motor shaft

  People know that any of the equipment needs maintenance. People use the device after a period of time, the device will be some fault. If people are using the device , when it carried out maintenance. So, people use the device rarely fails. To do this , people need proper maintenance of equipment .

  People using the motor shaft at the time, but also it needs to be maintained. First, when the operator uses the motor shaft finish every day , the need for it to be cleaned . To stain the operator on the motor shaft, grease , dust clean up, especially some of the discarded debris. If you do not clean out the waste debris, motor shaft will be worn away debris. In addition, people do not clean up the debris , but also that it caused a short circuit motor shaft .

  Second, the operator for the motor shaft tool change time. Operators need to first unscrew the chuck it . In addition, the operator will need to clean the chuck.

  Third, the former operator boot every day, you need to check the motor shaft of the cooling water. Operators need to see the working status of the cooling water, but also to check the pump. Users need to be cleaned of impurities in the cooling water, cooling water to prevent the breeding of microorganisms. If there is debris in the cooling water, make water pipes clogged. Poor water will cause motor shaft does not work.

Steel shaft,axle shaft and motor shaft which are producted by the professional manufacturer and exporter Fenghua Zhaoxu Micro Shaft Co., Ltd. are sold at home and overseas.
Home | About us | Device | Products | New Products | Application | Customer Care | Network | Contact us | Sitemap