Tel: +86-574-88959933
Fax: +86-574-88959932
Contact person: Ms. Betty Kang
Mobile phone: 86-18757419558
E-mail: info@microshafts.com
   
betty@microshafts.com
   zhaoxuaxles@gmail.com
Motor Shaft,Axle Shaft,Steel Shaft Manufacturers -> News -> Use steel shaft for everything except possibly the driver

Use steel shaft for everything except possibly the driver

In my opinion, use steel shaft for everything except possibly the driver. Steel is a lot cheaper and a lot more durable than graphite, and the advantages of graphite are pretty minimal. Steel shafts are also much more consistently manufactured, so you're more likely to get a consistent variation between adjacent clubs than with graphite.

Assuming you hit both of them correctly, you're now on the green either way, but you paid an extra $100 for the graphite steel shaft. After hitting the graphite-shafted 8, are you now so much closer that you are more likely to one putt (or not three putt) than with the steel? Not likely.

With your irons you don't care so much about maximum distance as accurate, known distance. If you hit every iron five yards further, you now have to hit a soft 8 instead of a normal 9. If you're that good, you probably already have a regular teaching pro, and you would have asked him.

They also twist less under torque than even the best of graphite shafts. This means implies that you will probably get more consistent iron shots with steel than with graphite.

Take a specific 360 yard hole. With steel shafts, you hit a 220 yard drive, then a 7 iron to the green. With graphite, you hit a 230 yard drive, then a soft 8 iron to green.

Steel shaft,axle shaft and motor shaft which are producted by the professional manufacturer and exporter Fenghua Zhaoxu Micro Shaft Co., Ltd. are sold at home and overseas.
Home | About us | Device | Products | New Products | Application | Customer Care | Network | Contact us | Sitemap